Chiller Power Supply Panels

Solutions

Chiller Power Supply Panels

Power Supply and Control Panels for Chiller Systems

Bross Otomasyon provides panel solutions for the power supply and control needs of chillers, pumps, fans, and cooling units. Design takes into account equipment manufacturers' data, motor currents, starting conditions, load profiles, and the facility's operating scenarios.

Cable and busbar sizing, protection coordination, drive or soft-starter interfaces, and panel layout are defined according to the project specification. If temperature, pressure, operating status, and alarm points need to be sent to the control system, the BMS/SCADA interfaces are clarified in advance.

Panel manufacturing, testing, and on-site commissioning are scoped according to the contract and acceptance plan. This brings power supply, motor control, and signals to be transferred to building automation together in one implementation plan.

Let's Discuss Your Chiller Panel Project
Industrial Chiller Power Supply and Control Panel Work Industrial Chiller Power Supply and Control Panel Work

Chiller Power Supply and Control Scope

  • High-current power supply panels
  • Soft-starter and drive panels
  • Cooling-group control panels
  • Energy measurement and monitoring
  • Protection coordination
  • Site installation and commissioning

Safe supply for high-current loads

Chiller groups draw high starting current; the supply panel is sized to withstand that current and harmonic load. Cable, busbar and protection are selected together.

Implementation Scope

  • High-current supply panels
  • Soft-starter and drive panels
  • Cable and busbar sizing
  • Protection coordination
  • Harmonics and power-quality assessment
Safe supply for high-current loads

Group control and monitoring

Staged start-up of the cooling group, temperature and pressure monitoring, and alarm management are brought together in the control panel. BMS integration can be added as needed.

Implementation Scope

  • Staged group control
  • Temperature, pressure and current monitoring
  • Alarm and protection scenarios
  • BMS/SCADA integration
  • Energy measurement and reporting
Group control and monitoring

Equipment-manufacturer data informs the design

Current, starting and operating data for compressor, pump and fan motors are verified against equipment documents. Protection and starting methods are selected with regard to project conditions and manufacturer recommendations.

Implementation Scope

  • Assess motor and load information
  • Protection and short-circuit requirements
  • Drive/starter interfaces
  • Cable, busbar and panel layout
Equipment-manufacturer data informs the design

Control points and acceptance scenarios

Status, alarm and measurement points to be shared with BMS/SCADA are listed before integration. Tests are planned around the operating sequence, protection and communications requirements.

Implementation Scope

  • BMS/SCADA point list
  • Alarm and interlock scenarios
  • Functional and site tests
  • Records and documentation
Control points and acceptance scenarios

Service access and technical documentation

Panel layout, connections and labelling are prepared to support maintenance-team access. The scope for drawing and test-record handover is agreed with the project acceptance plan.

Implementation Scope

  • Maintenance access and connection layout
  • Labels and equipment information
  • Operating and inspection notes
  • Handover package according to project scope
Service access and technical documentation

Chiller Power Supply Panels Frequently Asked Questions

Which standards are chiller supply panels manufactured to?

Panels are designed and manufactured to the TS EN 61439 series; any sector-specific project specification is confirmed before manufacturing.

Should a soft starter or drive be used?

The decision is made after assessing the effect of starting current on the supply and the operating scenario. Either solution can be included in the panel design.

Can it connect to an existing BMS?

Yes. The communication protocol is selected for the existing system; integration based on Modbus, Profibus or Ethernet can be provided.

What equipment information is needed to design a chiller panel?

Chiller and motor nameplate data, manufacturer connection diagrams, load list, operating scenarios, site conditions and BMS/SCADA interface requirements are used for preliminary design.

How is the starting method for compressor and pump motors selected?

The decision follows review of motor and manufacturer data, supply capacity, starting conditions and operating scenarios. The need for a drive or soft starter is verified within the project scope.

How can I request a quote for a chiller power supply panel?

Contact Bross Otomasyon with the equipment list, power and motor data, current single-line diagram, panel location, required control interfaces and technical specification. Missing information is identified during the preliminary review.

Cooling and HVAC Systems

Tell Us About Your Chiller Panel Requirements

Let's define the project scope by reviewing the equipment list, motor information, and control interfaces together.

PROJECT DISCUSSION

Let's review your project together.

Share your needs and contact information. Our team will get in touch to assess an engineering and manufacturing approach suited to your project.