LV Distribution Panels

LV Distribution Panels

A Safe, Controlled Point of Power Distribution

At Bross Otomasyon, we design and manufacture AG distribution panels to meet industrial facilities' power needs safely, reliably, and sustainably. For each project, we assess the facility's installed capacity, load distribution, operating conditions, and potential future capacity requirements. We design main and sub-distribution, transfer, bus-coupler, and power-factor-correction systems as an integrated whole, in line with applicable standards, selectivity criteria, and operational safety requirements. This helps deliver controlled power from the source to the production line while reducing the risk of faults and unplanned downtime. Equipped with high-current busbar systems, reliable protection equipment, metering devices, and monitoring infrastructure, our panels are tailored to applications ranging from production facilities to data centers and critical infrastructure projects.

Contact Us
Low-Voltage Distribution Panel Low-Voltage Distribution Panel
5 Panel and System Type
AG Power Distribution Infrastructure
End to End Engineering and Manufacturing

We design your facility's power infrastructure not only for today's needs, but also with future growth and capacity increases in mind.

  • Main distribution panels
  • Sub-distribution panels
  • Bus-coupler and transfer panels
  • Generator synchronisation panels
  • Automatic transfer systems
  • Load-shedding and protection systems
  • Energy measurement and analysis systems
  • Power factor correction integration
  • Busbar distribution systems
  • Remote monitoring and communications
  • Engineering design and power calculations
  • Installation, testing and commissioning

Facility-specific electrical distribution design

For each LV distribution-panel project, we begin by analysing the facility's existing power infrastructure and operational needs. Installed power, demand factor, load characteristics, short-circuit level, cable distances and future capacity increases are assessed together.

Kapsam

  • Prepare single-line diagrams
  • Perform load and power calculations
  • Determine short-circuit withstand ratings
  • Calculate cable and busbar cross-sections
  • Plan main and sub-distribution points
  • Assess generator, UPS and utility connections
Facility-specific electrical distribution design

Safe and functional panel design

We design distribution panels for the facility's operating conditions, access requirements and applicable international standards. Equipment layout, busbar structure, protection coordination and maintenance access are considered together to establish a maintainable panel architecture.

Kapsam

  • Panel layout and manufacturing drawings
  • Busbar and equipment sizing
  • IP protection class and environmental selection
  • Cable entries/exits and terminal plan
  • Assessment of maintenance and operating access
Safe and functional panel design

Coordinated protection for safe operation

We assess protection devices across the system to support facility safety and continuity of power during faults. Selectivity and coordination studies limit the area affected by a fault.

Kapsam

  • Overcurrent and short-circuit protection selection
  • Protection coordination and selectivity assessment
  • Earthing and residual-current protection needs
  • Arc and touch-safety criteria
  • Verification of standards and operating requirements
Coordinated protection for safe operation

Monitoring that makes power quality visible

We integrate measurement infrastructure into the distribution system to monitor facility energy consumption and electrical parameters. Central monitoring supports operational decisions and energy-efficiency work.

Kapsam

  • Select energy analysers and measurement equipment
  • Design current-transformer and measurement circuits
  • Remote monitoring and communications infrastructure
  • PLC, HMI and SCADA integration
  • Energy reporting and alarm scenarios
Monitoring that makes power quality visible

Panel manufacturing to applicable standards

We manufacture LV distribution panels to approved designs and technical specifications using quality materials and controlled production processes. Traceability, workmanship and technical conformity are considered at every stage.

Kapsam

  • Check project and material conformity
  • Panel mechanical assembly and equipment layout
  • Busbar processing, assembly and connections
  • Cable preparation, labelling and termination
  • In-process quality and visual inspections
Panel manufacturing to applicable standards

Controlled testing and commissioning on site

We inspect completed panels before dispatch and after site installation. Test results are recorded to support safe commissioning of the system.

Kapsam

  • Visual and mechanical conformity inspections
  • Electrical continuity and insulation tests
  • Functional tests of protection and control circuits
  • Site connection and commissioning checks
  • Test records and user briefing
Controlled testing and commissioning on site

Source transfers managed through defined scenarios

Utility, generator and UPS connections are assessed together with load priorities, transfer conditions and operating procedures. Interlocking and return logic are determined from the approved single-line diagram.

Kapsam

  • Identify backup sources and critical loads
  • Transfer and interlocking scenarios
  • Maintenance bypass and return conditions
  • Plan functional tests
Source transfers managed through defined scenarios

Documents aligned with the project acceptance plan

Panel manufacturing, testing and handover documentation are planned according to the customer specification and project acceptance steps. Scope, interfaces and delivery format are agreed before production.

Kapsam

  • Technical specification and material conformity
  • Revision and manufacturing records
  • Test results within the project scope
  • Current drawings and handover list
Documents aligned with the project acceptance plan

Frequently Asked Questions:

What is an LV distribution panel?

An LV distribution panel safely distributes power from a source to different areas, machines and production lines. It also protects, controls and measures electrical circuits.

Where are LV distribution panels used?

They are used in production facilities, commercial buildings, energy infrastructure, hospitals, data centres and many other facilities that need reliable electrical distribution.

Is panel design prepared for each facility?

Yes. Panel design is prepared for the project after assessing the facility's load profile, installed power, site conditions, operating method and future capacity needs.

What is the difference between a main and a sub-distribution panel?

The main distribution panel receives power from the main source and distributes it to the facility's main areas. Sub-distribution panels deliver that power to specific floors, areas or machine groups.

Can energy consumption be monitored in panels?

With suitable measurement devices and communications infrastructure, energy consumption, power quality and electrical parameters can be monitored and, if needed, transferred to SCADA or an energy-management system.

Do you provide testing and commissioning after manufacturing?

Yes. Depending on the project scope, production inspections, electrical and functional tests, site installation and commissioning support are provided.

What information is needed to request a quote for an LV distribution panel?

If available, a single-line diagram, panel list, load and short-circuit data, dimensions, cable-entry directions, ambient conditions and technical specification help with the preliminary review. Missing data and any need for a site survey are identified at quotation stage.

How is the test and handover scope for an LV panel determined?

Inspection and test steps are determined by the panel design, customer specification and acceptance plan. Applicable tests and handover records are agreed before manufacturing.

Teklif

Let's Design Your Distribution Solution

Share your load list and existing single-line diagram so we can define the main and sub-distribution stages together.

PROJECT DISCUSSION

Let's review your project together.

Share your needs and contact information. Our team will get in touch to assess an engineering and manufacturing approach suited to your project.