Electrical Engineering Design

Engineering Services

Electrical Engineering Design

Electrical Design: Distribution Systems Tailored to the Site

At Bross Otomasyon, electrical engineering begins with a review of the facility's existing infrastructure, load profile, and operational goals. For new facilities, capacity expansions, or panel upgrades, site information and the customer's specification form the main design inputs.

Single-line diagrams are supported by load, short-circuit, and voltage-drop calculations. Cable and busbar sizes, protective devices, selectivity, measurement points, and distribution stages are assessed as part of the complete system. Panel layouts, cable routes, and labeling information are also added to the project documents when needed.

Drawings and lists are prepared so manufacturing and installation teams can use them. Revisions, approval steps, and the file formats to be delivered are clarified at the start of the project; the scope of site surveys and implementation support is set according to facility conditions.

Let's Discuss Your Project
Bross Otomasyon Engineers Working on an Electrical Distribution Project
The entire distribution system on one page

Single-line diagram and calculations

The entire distribution system on one page

Every stage from the supply point to the final load is shown on the single-line diagram. The operations team can later see the assumptions on which the project was prepared.

  • Supply and distribution stages
  • Short-circuit and voltage-drop calculations
  • Cable cross-section and busbar selection
  • Earthing and lightning protection
Engineering is not drawing that fails to translate to the site. Every calculation is presented in a form that manufacturing and installation teams can use and that operations can rely on for years to come.

How We Work

1

Data Collection and Requirements Assessment

The existing facility, load profile, and operational expectations are measured on site and documented.

2

Single-Line Diagram and Calculation File

Each stage from the supply point to the end load is documented with diagrams, calculations, and a bill of materials.

3

Protection and Selectivity

Protection devices are selected according to short-circuit currents, and coordination is verified using curves.

4

Approval and Revision

Customer and facility approval is obtained; each revision is tracked by version number and delivered.

Service Scope

  • Single-line diagrams and layout plans
  • Load and short-circuit calculations
  • Protection coordination
  • Cable and busbar selection
  • Earthing and lightning protection
  • Approval package preparation

The entire distribution system on one page

Every stage from the supply point to the final load is shown on the single-line diagram.

  • Protection-device types and settings

  • Cable cross-sections and routes

  • Measurement and compensation points

Kapsam

  • Supply and distribution stages
  • Protection-device selection
  • Cable sizing
The entire distribution system on one page

A fault affects only the relevant circuit

Protection coordination aims to disconnect only the affected circuit in the event of a fault.

Selectivity tables are prepared using short-circuit currents and time-delay curves.

Kapsam

  • Short-circuit calculation
  • Selectivity and grading
  • Earthing design
A fault affects only the relevant circuit

A design that works on site

The project is prepared in a format that manufacturing and installation teams can use.

Panel layouts, cable routes and labelling diagrams are checked against site conditions.

Kapsam

  • Panel layout drawings
  • Cable routing plan
  • Labels and numbering
A design that works on site

Cross-sections selected for load and installation conditions

Cable and busbar cross-sections are calculated with regard to load current, short-circuit level, route and ambient conditions. The final selection is verified against project data and the applicable technical specification.

Kapsam

  • Assess load current and voltage drop
  • Check short-circuit withstand
  • Consider routing and installation conditions
  • Prepare busbar and cable lists
Cross-sections selected for load and installation conditions

Project delivery ready for site implementation

Earthing and protective connections are treated as part of the distribution design. As required by scope, project documents include drawings and lists for panel manufacturing and site connections.

Kapsam

  • Plan earthing and protective conductors
  • Panel connection and labelling details
  • Check documents against the technical specification
  • Deliver current revisions
Project delivery ready for site implementation

Frequently Asked Questions:

Do you support project approval processes?

Yes. For projects requiring institutional approval, calculation reports and diagrams are prepared in the format requested by the approving authority, and written responses are provided to questions.

How are revision requests managed?

Revisions are recorded and tracked by version so the current documents can be identified.

Which software is used to prepare projects?

The software and file format are determined by the project requirements and the customer's specifications.

Can load and short-circuit calculations be included in the project scope?

Yes. Load, voltage-drop and short-circuit assessments can be included when facility data and contract scope allow; inputs and assumptions are stated in the report.

Which electrical projects does Bross Otomasyon undertake?

Bross Otomasyon specialises in low-voltage distribution and control systems, panel design and related field integration. Medium-voltage work or work requiring other disciplines is assessed separately after interfaces and responsibilities are clarified.

Which files are provided with an electrical-design handover?

Depending on project scope, the handover may include single-line diagrams, layout and connection drawings, calculation and equipment lists, and revision information. File formats and approval steps are determined before quotation.

Engineering

Engineering Support for Your Electrical Project

Share your needs for a single-line diagram, protection coordination, and approval file so we can define the project scope and handover schedule together.

PROJECT DISCUSSION

Let's review your project together.

Share your needs and contact information. Our team will get in touch to assess an engineering and manufacturing approach suited to your project.