Solutions
UPS Bypass Panels
UPS Bypass Panels for Critical Loads
Bross Otomasyon designs and manufactures UPS bypass panels to manage load supply when an uninterruptible power supply requires maintenance or service. Before design, the UPS information, critical loads, utility and backup source connections, and the facility's operating scenario are assessed.
Manual or motorized bypass, transfer sequence, electrical and mechanical interlocks, and return conditions are defined according to the approved single-line diagram and equipment manufacturer requirements. Monitoring and alarm interfaces are clarified alongside the existing SCADA/BMS infrastructure.
Testing and handover steps are arranged according to the project specification and acceptance plan. Panel connections, transfer logic, and operating procedures are then clearly documented for the operations team.
UPS Bypass Panel Scope
- Manual and motorised bypass
- Synchronisation and transfer logic
- Maintenance without interrupting critical loads, where the system design permits
- Critical-load prioritisation
- Measurement and alarm infrastructure
- Testing and commissioning
Power remains available during maintenance
A UPS bypass panel transfers the load to utility power when the uninterruptible power supply is under maintenance or has a fault. Transfer logic, synchronisation and interlocks are designed for the facility's operating scenario.
System Scope
- Manual and motorised bypass selection
- Synchronisation and transfer logic
- Mechanical and electrical interlocks
- Critical-load prioritisation
- Test and return scenarios
No interruption during planned maintenance
Bypass allows planned maintenance and testing to be performed without interrupting the load. Step-by-step procedures and labels are prepared for the operations team.
System Scope
- Maintenance procedure and labelling
- Load-transfer tests
- Alarm and monitoring integration
- Commissioning and training
Transfer and return sequence defined
Normal supply, bypass transfer and return to UPS conditions are assessed against the facility's single-line diagram and manufacturer requirements. Operating steps are aligned with the user procedure.
System Scope
- Verify source and load connections
- Transfer and interlocking conditions
- Return-to-normal operating scenario
- Operating procedure and labelling
Critical conditions can be sent to a monitoring system
Panel status, measurement points and alarm signals can be determined according to the existing monitoring infrastructure. Interfaces, protocol and alarm list are agreed with the system owner before integration.
System Scope
- Define status and alarm points
- Measurement and communications interfaces
- SCADA/BMS integration requirements
- Test and handover records
Transfer steps verified against the acceptance plan
Operating and return scenarios for the bypass panel are planned according to the project scope, manufacturer instructions and facility test conditions. Acceptance records are added to the handover package.
System Scope
- Visual and connection inspections
- Interlock and control functions
- Transfer and return scenarios
- Prepare acceptance records
UPS Bypass Panels Frequently Asked Questions
Why is a UPS bypass panel needed?
It transfers the load to utility power without interruption during UPS maintenance, testing or certain fault conditions. Critical loads can therefore remain supplied during planned work.
How are transfer tests performed?
Tests are carried out under load during an outage window agreed with operations. Transfer times and return scenarios are recorded.
Can a bypass panel be redundant?
Yes. Dual supply and a redundant bypass arrangement can be configured at critical facilities; the selection depends on the load's continuity requirements.
How is a UPS bypass panel sized?
UPS power, load current, phase configuration, short-circuit level, cable connections and transfer scenario are assessed. Final ratings are determined from the approved design and equipment data.
Can a bypass panel be added to an existing UPS system?
Compatibility is assessed after reviewing the existing UPS model, utility and load connections, transfer logic and manufacturer instructions. Implementation scope is clarified using site information.
What information should be shared before requesting a UPS bypass-panel quote?
The UPS make/model and rating, input/output voltage and phase, connected loads, single-line diagram, installation area and requested bypass/monitoring scenarios support the initial assessment.